We can only support connecting to the wireless network on Windows XP machines using the built in wireless management. If you use another operating system, these screen shots should provide you the basic information you need to connect. You will just need to adapt them to your system setup.

Step 1
Locate your network connections under the control panel. Right click on your wireless network card and choose view wireless networks.

Figure 1

Step 2
If you are in one of the buildings covered by our wireless network, you should see the following screen. Highlight "BCUPublicWiFi" and click on connect in the bottom right corner of the screen. You will receive a warning message like the one below, click on "Connect Anyway".

Figure 2

Figure 3

Success!
After you have successfully connected, you should see a similar message on your laptop. Depending on your adapter you may connect at different speeds.